0
SMA Energy Meter EMETER-20
€546.10
Tax included
EMETER-20
0712971128484
The SMA energy meter is an ideal measurement solution for intelligent energy management as SMA Smart Home.
It takes electrical measured values and transmits them via Ethernet cable so the intelligent energy management can optimize the load/use of the battery, reliably limit active power at the grid feed-in point and take into account the self- consumption.
Due to the worldwide component crisis, the replenishment time for the SMA range is 7 to 9 months. For more precise delivery times, you can contact us by chat or by email.
" SMA Energy Meter "
Description :
Easy to use
- Easy "plug and play" installation
- View measured values via Sunny Portal
Flexible
- Top-hat rail mounting, takes up little room.
- Speedwire communication with Ethernet cable
- Universal deployment
Powerful measurement solution
- Fast three-phase reading
- Allows you to monitor and efficiency manage the use of energy
Storage application example :
Technical data :
SMA Energy Meter | |
Communication | |
Fieldbus | Speedwire, 10/100 Mbit/s |
Max. radio range | |
Speedwire / Fast Ethernet | 100 m (between two devices) |
Inputs (voltage and current) | |
Nominal voltage | 230 V / 400 V |
Frequency | 50 Hz, 60 Hz / ±5 % |
Nominal current / limiting current per line conductor | 5 A / 63 A |
Start-up current | < 25 mA |
Connection cross-section | 1,0 mm² – 25 mm² |
Torque for screw terminals | 2,0 Nm |
Ambient conditions in operation | |
Ambient temperature | –25 °C to +40 °C |
Storage temperature range | –25 °C to +70 °C |
Protection class (according to IEC 62103) | II |
Degree of protection (according to IEC 60529) | IP2X |
Max. permissible value for relative humidity (non-condensing) | 95% |
General data | |
Dimensions (W / H / D)) | 88 / 70 / 65 mm |
Weight | 0,3 kg |
Individual units | 4 |
Mounting | Switch or meter cabinet / Top-hat rail mounting |
Status display | 2 DEL |
Self-consumption | < 2 W |
Warranty | 2 years |