3
Solar controller MPPT 10A SRNE - MT2410
€60.60
Tax included
MT2410
0712971136601
The new SRNE range of solar controllers offers optimum MPPT tracking efficiency of 99.9%, as well as load efficiency 15-20% higher than PWM.
Compatible with RM1 display
40 item(s) left in Stock!
Adoption of a double-peak or multiple-peak tracing technique, used for the condition when part of the solar panel is in shadow or parts of the solar panel are damaged.
Built-in maximum power point tracking algorithm promotes pv system energy use efficiency. Charging efficiency is 15% ~ 20% higher than in PWM mode.
It can find the best working point of the I-V curve in 1 minute. MPPT efficiency can reach 99.9%.
Adopts advanced digital power supply techniques that make energy conversion efficiency reach 97%.
Four load levels: MPPT - equalizing load - boosting load - floating load.
Current-limiting charging mode: when the solar panel's power is oversized, the controller automatically reduces the charging load, allowing the system to operate below the rated charging current.
Indicates fault codes in the event of anomalies, helping the user to confirm system failure.
Various load control methods. Automatic day/night cycle recognition.
Various system protection functions, including overcurrent, overdischarge, overload, overtemperature, reverse battery connection and short-circuit protection, etc.
Compatible with RM1 display
| Model | MT2410 |
| System voltage | 12V |
| Maximum solar panel input power | 130W |
| Transfer efficiency | ≤ 96% |
| Flow load / discharge current | 10A |
| Load loss | < 15mA |
| Maximum solar panel input voltage | < 150V |
| MPPT tracking efficiency | > 99% |
| Overvoltage protection | 16.5V |
| Limited charging voltage | 15.5V |
| Equalize charging voltage | 15.2V |
| Equalize charging interval | 30 days |
| Increase charging voltage | 14.4V |
| Floating charge voltage | 13.8V |
| Excessive discharge recovery voltage | 12.5V |
| Over discharge voltage | 11.0V |
| Boost charge time | hours |
| Equalization charging time | hour |
| Overheating protection | Yes |
| Luminous voltage (on) | |
| Luminous voltage (deactivated) | |
| Functional delay time | min |
| Operating temperature | ~ +65°C |
| Weight | 430g |
| Altitude | ≤ 3000m |
| Dimension | 143*71*37.4 (mm) |
| Installation dimension | 139*48 (mm) |
| Overload protection | Load current ≥1.25 times rated current, switch off load within 10 seconds; Load current ≥1.5 times rated current, switch off load within 5 seconds |
| Protections | Reverse polarity. 2. Excessive interior temperature. 3. PV input terminal voltage higher than value. 4 Charging 5 Reverse charging protection at night 6 Protection against TVS rays 7. Waterproof: IP 64 |
MT2410
Data sheet
- Charging power
- 10A
- Voltage
- 12V / 24V
- MPPT/PWM
- MPPT
- Video Youtube 1 - ID
- GXvxzPA7aBI
Specific References
New
