Multisolar 10kW hybrid inverter: Energy autonomy and guaranteed savings
MultiSolar: Store the bare minimum in your batteries and feed it back into the grid, provided the batteries are full.
Conversely, use the grid to make up for the shortfall in winter production, and top up the batteries when it rains.
Optimize your production to the maximum and never worry about a power cut again.
Connect up to 14850Wp to the PV input of the Hybridinverter.
Store and use your solar-generated electricity at a later date.
Description
High-performance three-phase MultiSolar inverter for hybrid power systems.
Connect solar panels, batteries and, optionally, a grid input to power your system.
Enjoy top performance thanks to two independent integrated mppt trackers, as well as user-friendliness thanks to its compact design and intuitive LCD display.
- Pure sine wave output signal: 10kW
- Max PV input power: 14850Wp
- AC input: 3-phase
- AC output: 3-phase
- Microprocessor-controlled for greater stability
- Multiple operations:
- Grid-connected, off-grid and grid-connected with backup power
- Integrated mppt solar charger (two independent inputs)
- Backlit LCD display for simple, interactive operation
- Multiple means of communication
- "Green" alternative to generators
- User-adjustable battery charging current, up to 200A
General features
| Dimension (mm) | 167.5 x 500 x 622 |
| Communication port | RS 232/USB |
| Operating temperature |
| - 50° C |
On-grid operation
| Nominal DC voltage - Max. voltage | 720 V DC - 900 V DC |
| Starting voltage | 320 V DC- 350 V DC |
| MPPT voltage range | 400 V DC - 800 V DC |
6
| Nominal input voltage | 230 VAC (P-N) / 400 VAC (P-P) |
| Input voltage range | 184 - 265 V AC per phase |
| Rated power efficiency | > 95% |
Off-grid operation
6
230 VAC (P-N) / 400 VAC (P-P) |
Hybrid operation
| Rated voltage DC - max voltage | 720 V DC - 900 V DC |
| Starting voltage | 320 V DC - 350 V DC |
| Voltage range mppt | 400 V DC - 800V DC |
| Rated output voltage | 230 VAC (P-N) / 400 VAC (P-P) |
| Output voltage range | 184 V DC - 264.5 V DC per phase |
| Max. current | 14. |
| A per phase |
| AC start-up voltage | 120 V AC - 140 V AC per phase / 180 VAC per phase |
| Input voltage range | 170-280 VAC per phase |
| Output voltage | 230 VAC (P-N) / 400 VAC (P-P) |
| Max. charging current | 100- 200 A |
Remote control and UPS configuration
Connect the UPS to your computer using the USB cable supplied.
SolarPower software enables control and monitoring of multiple devices via LAN, Internet or USB.
Alert notifications, pop-up screen, sms and email.
Software
SolarPower 1.17SP7
